|Price||To be announced|
|Status||Out Of Stock|
|Microphone Type||Includes broadcast lavalier microphone|
|Switch||Programmable Mute Switch|
|Noise/Signal||Equivalent Noise Level (A-weighted): 25dB-A|
|Frequency Range||35Hz - 22kHz|
|Sensitivity||-33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Output Impedance||Receiver (RX-CAM): 300Ω
|Dimension||Receiver (RX-CAM): 111mm X 65mm X 52mm
Transmitter (TX-BELT): 111mm X 65mm X 40mm
Lavalier: 12.00mmH x 4.50mmW x 4.50mmD
|Weight||Receiver (RX-CAM): 190gm
Transmitter (TX-BELT): 190gm
|Cable||Captive TRS cable|
|Connector||Output Connectors: 1 x 1/8" / 3.5 mm TRS Male Unbalanced (Lockable)|
|Power Module||Receiver (RX-CAM): 2 X AA Battery Or MicroUSB
Transmitter (TX-BELT): 2 X AA Battery Or MicroUSB
|Battery||AA battery or USB powered
Battery Type: 2 x AA (Not Included)
Approx. Battery Life: 30 Hours (Alkaline)
|System Requirements||2.4GHz Fixed Frequency Agile System
System dynamic range: 112dB
|Audio recorders|| highest possible audio reproduction quality.
Number of Audio Channels: 1
Audio I/O: 1 x 1/8" / 3.5 mm TRS Female Unbalanced Output (Lockable)
Audio Output Level: 0 dBV (Max)
Audio Input Level: 1 V RMS (Max)
The Rode RODELink Filmmaker Kit represents the next generation of digital wireless systems with Series II, 2.4GHz digital transmission and 128-bit encryption.The Filmmaker Kit boasts a remarkable battery life which is AA battery or USB powered, routinely operating for over 30 hours on two AA batteries. Up to eight systems can operate on set. In this exclusive Filmmaker Kit, it has A 3-stage gain adjustment that set the input to accommodate mic levels ranging from a soft whisper to loud speech. The receiver's of this flimmaker output to the 3.5mm audio input of any DSLR or mirrorless camera. Alternatively, the VXLR 3.5mm to XLR adapter (available separately) allows you plug your system into the XLR input of a camcorder or recording device. The transmitterâ€™s belt clip and receiverâ€™s shoemount adapters can be swapped and allowing either component to be belt clipped and mounted on cameras and tripods, or used in an audio bag. In this RODELink, The unit can be mounted on a standard camera shoe mount, for added versatility the shoe mount can be located in one of two positions 3/8" thread or belt-clip. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RODE's omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality which gives user excellent experience. It has no warranty.
Have question about this product? Get specific details about this product from expert.
Get specific details about this product from customers who own it.